CMLA A Series 500 lbs Linear Actuator

FEATURES AND BENEFITS

Fully rated at 500 lbs to handle dynamic loads both in compression and tension

Up to 1.5 in/sec at rated load

3.9 in , 5.9 in, 11.8 in, 17.7 in, and 23.6 in

Safety clutch aids in the prevention of damage due to accidental overload conditions

Both ball and trapezoidal screw models available

115Vac or 230Vac single phase

Standard on ball screw models

Position feedback potentiometer

Adjustable limit switches

CMLA A Series 500 lb Product Specifications
Capacitor Model	Motor	Max. Dynamic Load	Max. Static Load	Screw	Gear	Motor Power	Amperage	Lifting Speed	Duty Cycle	Capacitor Rating
#	Type	(lbs) N	(lbs) N	Type	Ratio	Volts	Amps	(in/s) mm/s	(in/hr) m/hr	mdf
SK6405-7-13	AC	(500) 2200	(750) 3336	Trapezoid	11.5	115	2.3	(0.71) 18.0	(810) 20.6	35
SK6405-7-10	AC	(500) 2200	(750) 3336	Trapezoid	11.5	230	1.4	(0.71) 18.0	(810) 20.6	10
SK6405-7-13	AC	(500) 2200	(750) 3336	Ball	6.5	115	2.4	(1.5) 38.1	(1200) 30.5	35
SK6405-7-10	AC	(500) 2200	(750) 3336	Ball	6.5	230	1.5	(1.5) 38.1	(1200) 30.5	10
Notes: 1. The correct capacitor mfd should be used for each model or the cylinder will not perform as rated. 2. Order Hard Start Kit 192036494 for applications where high starting torque is required (low temperature, high starting load)